1. Titanium plate is the surface of the oxide film is equivalent to a good long-term wear-resistant release agent, the use of titanium plate to save the separation agent, so that easy to peel off the plate, eliminating the pre-treatment process, The board is lighter than the copper plate.
2. Titanium plate life is more than 3 times the copper plate, according to operating conditions up to 10 to 20 years
3. With titanium plate made of electrolytic copper crystal structure dense, smooth surface, excellent quality.
4. Since the titanium plate without the need to apply the separation agent, which can avoid the pollution of copper electrolyte.
5. To improve production capacity to reduce the cost of electrolytic copper production, which has a better economic benefits.
Standard : ASTM B265 / ASME SB265, AMS 4911 |
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size : 8mm to 100mm |
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile. |
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
Condition : Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished |