knowledges

Molybdenum Rod Production Process And Implementation Standards

2024-01-05 18:00:06

Molybdenum rod is mainly used in iron and steel industry, most of which are directly used in steelmaking or cast iron after industrial molybdenum oxide briquetting, and a small part is fused into ferromolybdenum, and then used in steelmaking after molybdenum foil. The molybdenum content in low-alloy steel is less than 1%, but this consumption accounts for about 50% of the total molybdenum consumption. Adding molybdenum to stainless steel can improve the corrosion resistance of steel. Adding molybdenum to cast iron can improve the strength and wear resistance of iron. Nickel-based superalloy containing molybdenum 18% has the characteristics of high melting point, low density and low thermal expansion coefficient, etc. Molybdenum metal is widely used in electronic devices such as electron tube, transistor and rectifier. Molybdenum oxide and molybdate are excellent catalysts in chemical and petroleum industry. Used in aerospace and mechanical industries. Molybdenum is one of the essential trace elements in plants and is used as trace element fertilizer in agriculture.

Molybdenum rod

Material: Molybdenum and Molybdenum(Mo)


Brand: MO1 MO2


Standard: GB/T, ASTMB and other national standards ≥99.95% (maximum: 99.99%)


Wire ring products according to customer requirements


Process: forging, rolling, drawing thickness (mm) width (mm) length


Plate: 0.5-10 50-800 50-2000


Foil: 0.03-0.09 30-150 >200


Sheet material: 0.1-0.5 30-400 30-1000


YOU MAY LIKE

Niobium Plate

Niobium Plate

View More
Niobium Bar

Niobium Bar

View More
Tungsten Plate

Tungsten Plate

View More
Nickel Foil

Nickel Foil

View More
Nickel Machining Components

Nickel Machining Components

View More
Tantalum Target

Tantalum Target

View More