Molybdenum bar has high melting point, good thermal conductivity and low thermal expansion property. At high temperature, it has high oxidation resistance and high strength.

  Molybdenum bar can be manufactured according to the needs of customers. In addition, there are three different surface treatments, which are determined by the end use of rods.

  Production of pure molybdenum bars and lanthanum doped molybdenum bars. The doped lanthanum has a smaller cross-section after recrystallization and can maintain ductility at higher temperature.

   Molybdenum rod appearance: Forged rod and polished rod, forged rod surface allows a slight oxide film, forging hammer mark; polished rod surface appears metallic luster, no oxidation phenomenon; two surfaces without defects, such as delamination, cracks, burrs and vertical cracks.

  Molybdenum bar Purity: 99.95%, Mo

  Molybdenum bar specifications: diameter. (0.8-16) x long (mm). The deviation of diameter and length is provided according to GB4188 - 84 standard or user's requirement.

  Molybdenum rodapplication: used for manufacturing electrical vacuum devices and electric light source parts.

   If you are interested in molybdenum bar, please feel free to contact me